Series HFF 105 Haloger FREE

Series HFF 105 Haloger FREE

hff-105-ing
pdf-prodotti
Note: knowing the diameter of the object to be covered, the width of the flattened tubing can be calculated using the formula 1.57079 x diameter. Knowing the width of the tubing, the diameter of the object to be covered can be calculated using the formula 0.6366 x width of tubing.
HEATSHRINKABLE TUBING IN POLYOLEFIN “SERIES HFF-105” SHRINK RATIO 2 ÷ 1

GENERAL FEATURES

Series HFF-105 in polyolefin tubing is a heatshrinkable tubing with excellent physical and electrical properties. The main characteristics of this sleeving are: the correspondence to the most important Regulations which refer to the low emission of to toxic fumes in case of fire, such as the Railway normative EN 45545-2 and BOEING BS7239, and optional predisposition for marking purpose by thermal transfer system.

TECHNICAL FEATURES

  Shrink ratio 2 ÷ 1
  Operating temperature – 55 °C ÷ + 125°C
  Flammability ACCORDING TO STANDARD ASTM D 635-HB
  Fire behavior and resolution gas and smoke BS6853(1999) Vehicle category 1a
HL3 ACCORDING REQUIREMENT
R22 – R23 OF THE RAILWAY RULE
EN 45545-2:2013+A1:2015
LVL1-085 compliant A3 Boeing BS7239
  Oxygen index  35% ACCORDING TO STANDARD EN ISO 4589-2
  Standard colors On Black – White – Yellow Diameter 1,2 mm available only in Black color
  Packing On reels
  Traction resistance 10 N/mm² ACCORDING TO STANDARD ASTM D 638
  Elongation at break 200% ACCORDING TO STANDARD ASTM D 638
  Longitudinal change -10% / +5% ACCORDING TO STANDARD ASTM D 2671

  Water absorption

-<0,15% ACCORDING TO STANDARD ASTM D 570

  Specific gravity

1.40 gr/cm³ ACCORDING TO STANDARD ASTM D 792
  Min. shrinking temperature > 90 °C
  Heat shock (4 ore a 175 °C) No Demage ACCORDING TO STANDARD ASTM D 2671
  Elongation after ageing (168h a 150 °C) ->100% ACCORDING TO STANDARD D 638
  Bending at low temperature (-55
 °C)
No Break ACCORDING TO STANDARD IEC 60684-2
  Resistance to fluids Good ACCORDING TO STANDARD AMS-DTL-23053/5
  Copper corrosion  No corrsion ACCORDING TO STANDARDASTM D 2671 B
  Volume resistivity  10 ¹4 ohm.cm ACCORDING TO STANDARD ASTM D 257
  Dielectric strength 20 KV/mm ACCORDING TO STANDARD ASTM D 2671
  Printability Excellent Thermal transfer
  Information regarding application See chapter
“Choice of heatshrinkable tubing and information regarding its application”
BEFORE SHRINKING AFTER FREE SHRINKING
Internal diameter in mm (D) Internal diameter in mm (d) Wall thickness in mm (e) Packaging
mt.
2,5 ÷ 2,8 1.2 0,43 ÷ 0,60 300
3,6 ÷ 3,9 1.6 0,55 ÷ 0,72 300
5,2 ÷ 5,5 2.4 0,55 ÷ 0,72 300
6,7 ÷ 7,0 3.2 0,65 ÷ 0,80 300
10,0 ÷ 10,40 4.8 0,65 ÷ 0,75 150
 13,6 ÷ 14,0 6.4 0,65 ÷ 0,75 150
20,4 ÷ 20,8 9.5 0,70 ÷ 0,85 50
27,0 ÷ 27,4 12.7 0,85 ÷ 1,00 50
40,0 ÷ 40,5 19.1 0,90 ÷ 1,05 50

50,8 ÷ 53,0

25.4 0,90 ÷ 1,05 50

RTE reserves the right to make any modification to this catalogue without prior notice. I dati contenuti in questo catalogo sono basati su test che riteniamo validi, ma che non costituiscono garanzia implicita od espressa. Potranno variare in qualunque momento in funzione di nuove conoscenze od esigenze, senza preavviso da parte della ns. società.
The information given in this catalogue is based on tests we believe to be valid, but it does not constitute intended or explicit guarantee. The information may vary at any time in accordance with updated knowledge and needs, without prior notification from our company.

Consigliamo ai ns. clienti di valutare l’idoneità dei ns. prodotti secondo la loro applicazione specifica.
We recommend that our customers assess the suitability of our products in regard to their specific application.

In nessun caso ci riterremo responsabili per qualsiasi eventuale danno, indiretto o conseguente alla vendita, rivendita, trasferimento, uso o uso improprio del prodotto.
In no case shall we be considered liable for any damages, whether indiirect or in consequence of the sale, resale, transfer, use or incorrect use of the product.

Revision November 2019