Download
Data Sheet

Note: knowing the diameter of the ob- ject to be covered, the width of the flattened tubing can be calculated using the formula 1,57079 x diame ter.
Knowing the width of the tubing, the diameter of the object to be covered can be calculated using the formula 0,6366 x width of tubing.
 
BEFORE SHRINKING AFTER FREE SHRINKING  
Internal diameter in mm
(D)		 Internal diameter in mm
(d)		 Wall thickness in mm
(e)		 Packaging in lengths

9 3 1.8 1mt./1,5mt.
15 4 2.4 1mt./1,5mt.
22 6 2.7 1mt./1,5mt.
33 8
 3.2 1mt./1,5mt.
40 12
 4.1 1mt./1,5mt.
45

12

 4.1 1mt./1,5mt.
55 16
 4.1 1mt./1,5mt.
75 22 4.1 1mt./1,5mt.
85 25 4.3 1mt./1,5mt.
95 30 4.3 1mt./1,5mt.
105 30 4.3 1mt./1,5mt.
115 34 4.3 1mt./1,5mt.
130 36 4.3 1mt./1,5mt.
160 50 4.3 1mt./1,5mt.
180 50 4.3 1mt./1,5mt.
200 60 4.3 1mt./1,5mt.
235 65 4.5 1mt./1,5mt.
265 75 4.5 1mt./1,5mt.
300 85 4.5 1mt./1,5mt.
350 100 4.5 1mt./1,5mt.
 
HEATSHRINKABLE
TUBING IN
POLYOLEFIN
HEAVY WALL


"SERIES TTPAS"
   Caratteristiche generali
 
The Series TTPAS heavy wall polyolefin tubing is a self-extinguishing heatshrinkable tubing with a high shrink ratio. In addition to being particularly suitable for all uses in which it is necessary to cover and protect irregular-shaped objects and compo- nents, it has a good resistance to common fluids and solvents.
After shrinking, the heavy wall makes this tubing especially suited for uses in which high mechanical protection is required.
  Caratteristice Tecniche
  Shrink ratio
 See table  
  Operating temperature
 - 55 °C ÷ + 125°C  
  Minimum shrink temperature +120 °C  
  Tensile strength
 ≥14 MPA IN ACCORDANCE WITH ASTM D 2671
  Elongation ≥ 400% IN ACCORDANCE WITH ASTM D 2671
  Heat ageing test
   Tensile strength
   Elongation to break
> 12 MPa
> 300 %
IN ACCORDANCE WITH ASTM D 2671/150 °CC, 168 ore
  Density 1.05g/cm3 IN ACCORDANCE WITH ASTM D 792
  Shrinkage/Longitudinal change
 0 ÷ - 10% IN ACCORDANCE WITH UL 224
  Dielectric strength ≥ 18 kV/mm
 IN ACCORDANCE WITH IEC 243
  Volume Resistance ≥1013 Ωcm IN ACCORDANCE WITH IEC 93
  Stability to copper good IN ACCORDANCE WITH ASTM D 2671
  Water absorption < 0,15% IN ACCORDANCE WITH ISO 62 / 23 °C, 14 giorni
  Standard colours black  
  Other colours not available  
  Standard Packaging Length of 1.000 mm
1.200 mm - 1.500 mm
Other lengths upon request
  
  Information regarding application See the chapter
"Choosing heatshrinkable tubing and information regarding its application"

 

 

 

La RTE si riserva il diritto di apportare eventuali modifiche al presente catalogo senza preavviso. RTE reserves the right to make any modification to this catalogue without prior notice.

I dati contenuti in questo catalogo sono basati su test che riteniamo validi, ma che non costituiscono garanzia implicita od espressa. Potranno variare in qualunque momento in funzione di nuove conoscenze od esigenze, senza preavviso da parte della ns. società.
The information given in this catalogue is based on tests we believe to be valid, but it does not constitute intended or explicit guarantee. The information may vary at any time in accordance with updated knowledge and needs, without prior notification from our company.

Consigliamo ai ns. clienti di valutare l’idoneità dei ns. prodotti secondo la loro applicazione specifica.
We recommend that our customers assess the suitability of our products in regard to their specific application.

In nessun caso ci riterremo responsabili per qualsiasi eventuale danno, indiretto o conseguente alla vendita, rivendita, trasferimento, uso o uso improprio del prodotto.
In no case shall we be considered liable for any damages, whether indiirect or in consequence of the sale, resale, transfer, use or incorrect use of the product.