Download
 Data Scheet

Nota: knowing the diameter of the object to be covered, the width of the flattened tubing can be calculated using the formula 1,57079 x diameter.
Knowing the width of the tubing, the diameter of the object to be covered can be calculated using the formula 0,6366 x width of tubing.
 
BEFORE SHRINKING AFTER FREE SHRINKING  
Internal diameter in mm (D) Wall thickness in mm (e) Internal diameter in mm (d) Wall thickness in mm (e) Packaging
mt.

1.2 0.10 ± 0.05 0.4 ± 0.1 0.20 ± 0.05 200
1.6
0.10 ± 0.05
 0.6 ± 0.1 0.20 ± 0.05 200
 2 0.13 ± 0.05
 0.9 ± 0.1
0.22 ± 0.05 200
 2.4 0.13 ± 0.05
 1.1 ± 0.1
0.25 ± 0.05
200
 3.2 0.13 ± 0.05 1.4 ± 0.1
 0.28 ± 0.05
200
 3.5 0.13 ± 0.05
 1.6 ± 0.1
0.28 ± 0.05
200
 4 0.15 ± 0.05
 1.8 ± 0.1
0.30 ± 0.05
200
 4.8 0.15 ± 0.05
 2.3 ± 0.2
 0.32 ± 0.05
100
 6.4 0.15 ± 0.05
 2.8 ± 0.2
0.32 ± 0.05
100
 7 0.15 ± 0.05 3.3 ± 0.2
0.32 ± 0.05
100
 8 0.15 ± 0.05
 3.8 ± 0.2
0.32 ± 0.05
100
 9.5 0.16 ± 0.05
 4.3 ± 0.2 0.35 ± 0.05 100
 10 0.16 ± 0.05
4.8 ± 0.2
0.35 ± 0.05 100
 11 0.18 ± 0.05 5.3 ± 0.2
0.40 ± 0.05
100
 12 0.20 ± 0.1
 5.7 ± 0.3 0.40 ± 0.05
100
 12.7 0.20 ± 0.1
6.2 ± 0.3
 0.40 ± 0.05
100
 14 0.20 ± 0.1
6.7 ± 0.3
0.40 ± 0.05
100
 15 0.22 ± 0.1 7.2 ± 0.3 
0.40 ± 0.05
100
 16 0.22 ± 0.1
7.7 ± 0.3
0.40 ± 0.05
100
 18 0.22 ± 0.10 9.0 ± 0.3 0.40 ± 0.05 100
 19.1 0.22 ± 0.10
10.0 ± 0.3 0.45 ± 0.10 100
 22 0.25 ± 0.10
11.0 ± 0.3
0.45 ± 0.10
100
 25.4 0.25 ± 0.10
12.5 ± 0.3 
0.45 ± 0.10
 50
 
HEATSHRINKABLE
SELF-EXTINGUISHING
TUBING
IN POLYOLEFIN
"SERIES STP125-BS"
THIN WALL
SHRINK RATIO
2 ÷ 1
  Caratteristiche generali
 
Series STP125-BS polyolefin tubing is a self-extinguishing heatshrinkable tubing which has excellent physical and electrical properties. It is ideal for general protective covering, cabling and insulation and thanks to the simplicity with which it shrinks it adapts very easily to the item being covered. In addition, thanks to the speed with which it shrinks it is particularly suitable when limited shrinking time and/or working time is needed.
  Caratteristice Tecniche
  Shrink ratio
 2 ÷ 1  
  Operating temperature
 - 55 °C ÷ + 125°C  
  Flammability (except trasparent)   Meets Standard UL224 VW-1
  Standard colours
 Black
other colours upon request		  
  on reels in bobine  
  Minimum shrinking temperature
 > +90°C  
  Dielectric strength
 >15 KV/mm  
  Tensile strength
 14 MPA
  Tensile strength
   after ageing (7 days)
 10 MPA  
  Elongation to break
 400%
  Elongation after heat
   ageing test		 300% ( 168 hours at 158°C) 
  Heat shock
 No dripping, slipping
or cracking		 ( 4 hours at 250°C)
  Water absorption
 0,2%  
  Longitudinal variation
 ± 0,5%  
  Information regarding application See chapter
"Choice of heatshrinkable tubing and information regarding its application"

 

La RTE si riserva il diritto di apportare eventuali modifiche al presente catalogo senza preavviso. RTE reserves the right to make any modification to this catalogue without prior notice.

I dati contenuti in questo catalogo sono basati su test che riteniamo validi, ma che non costituiscono garanzia implicita od espressa. Potranno variare in qualunque momento in funzione di nuove conoscenze od esigenze, senza preavviso da parte della ns. società.
The information given in this catalogue is based on tests we believe to be valid, but it does not constitute intended or explicit guarantee. The information may vary at any time in accordance with updated knowledge and needs, without prior notification from our company.

Consigliamo ai ns. clienti di valutare l’idoneità dei ns. prodotti secondo la loro applicazione specifica.
We recommend that our customers assess the suitability of our products in regard to their specific application.

In nessun caso ci riterremo responsabili per qualsiasi eventuale danno, indiretto o conseguente alla vendita, rivendita, trasferimento, uso o uso improprio del prodotto.
In no case shall we be considered liable for any damages, whether indiirect or in consequence of the sale, resale, transfer, use or incorrect use of the product.