Download
 Data Sheet
STANDARDISED
ENEL
DRY-REED UNIT
FOR "HV"
ELECTRICAL
SUBSTATIONS

"SERIES LV11"

  
Caratteristiche generali
The standardised unit for DRY-REED relay Series LV11 standardised ENEL, is made in 19" anodised aluminium rack and 4U in accordance with the ENEL LV95 requisites.
Equipped with 12 removable cards the LV11 unit is used to repeat signals of the equipment present in HV substations.
The LV11 unit is installed on peripheral cabinets of the command and control protection system in "HV" electrical substations.
   
Caratteristice Tecniche
Supply voltage: 110 V dc. According to the type of use, the standardised
12 removable cards, each one equipped with 8   ENEL LV11 unit can be equipped with a different
  DRY-REED relays with 1 NO contact.   number of cards. In addition their position can
Other technical features in accordance with the  requisites of the ENEL LV11 specifications.   be modified.
      These configurations can be made according to the
      requisites in specified in the ENEL LQ580 tables.
Operating temperature: -10 ÷ +55°C. Each card equipped with 6 DRY-REED relays, each
Atmospheric pressure: 70 ÷ 110 KPa.   of which with 3 NO contacts (signal version) or with
Relative humidity: < = 95%.   3 NC contacts (measurement version).
 
In accordance with requisites made on    
  ENEL REMC 01 Table 1.    

La RTE si riserva il diritto di apportare eventuali modifiche al presente catalogo senza preavviso. RTE reserves the right to make any modification to this catalogue without prior notice.

In nessun caso ci riterremo responsabili per qualsiasi eventuale danno, indiretto o conseguente alla vendita, rivendita, trasferimento, uso o uso improprio del prodotto.
In no case shall we be considered liable for any damages, whether indiirect or in consequence of the sale, resale, transfer, use or incorrect use of the product..